GagalU Educational Science Model Physical Experiment Model ulic Machine Model Physics Teaching Instrument Mechanics Teaching Aid

Tool Technical Data Small Piston Diameter 1.5cm Large Piston Diameter 4.8cm Small Piston Area 1.5cm Large piston area 10cm2 Normal pressure 2-2.2MPa The pressure of the large piston is about 3.14KN at normal pressure. Demonstration experiment: A crushed vertically and closed the plaster during work. B Compression Spring The small piston is slightly excited and a great force can be achieved on the large piston. C Stamped Sheet - Put a big nut on the workbench, put a thin iron on the nut, put a nail on the iron, shake the handle, and when the pressure reaches a certain value, the iron will deform. D bend steel with a diameter of 4mm or less. Put the round steel into the bending device and shake the handle to achieve a certain pressure value, the round steel will bend.

• This ulica machine model is used for middle school physics experiments to illustrate the structure and principle of ulica machine.
• The tool is equipped with a small cylinder, a large cylinder and a pressure gauge or an angle cut valve.
• They are all fixed to the base and then connected to each other by a duct. The fuel tank is fixed inside the base.
• Dimensions: 270 × 165 × 335 mm
• Note: The tool should be handled gently to prevent it from falling and damaging the instrument. It should be stored in the tool cabinet after the experiment. The pressure gauge seat retainer should not be overturned to prevent the steel ball from falling inside the seal. In the course of the experiment, after achieving the obvious experimental results, do not continue to force, so as not to damage the sealing parts of the instrument.